Within TOSTER there are a few robust alternatives to the
`t_TOST`

function.

The Wilcoxon group of tests (includes Mann-Whitney U-test) provide a
non-parametric test of differences between groups, or within samples,
based on ranks. This provides a test of location shift, which is a fancy
way of saying differences in the center of the distribution (i.e., in
parametric tests the location is mean). With TOST, there are two
separate tests of directional location shift to determine if the
location shift is within (equivalence) or outside (minimal effect). The
exact calculations can be explored via the documentation of the
`wilcox.test`

function.

TOSTER’s version is the `wilcox_TOST`

function. Overall,
this function operates extremely similar to the `t_TOST`

function. However, the standardized mean difference (SMD) is
*not* calculated. Instead the rank-biserial correlation is
calculated for *all* types of comparisons (e.g., two sample, one
sample, and paired samples). Also, there is no plotting capability at
this time for the output of this function.

As an example, we can use the sleep data to make a non-parametric comparison of equivalence.

```
data('sleep')
library(TOSTER)
test1 = wilcox_TOST(formula = extra ~ group,
data = sleep,
paired = FALSE,
eqb = .5)
print(test1)
```

```
##
## Wilcoxon rank sum test with continuity correction
##
## The equivalence test was non-significant W = 20.000, p = 8.94e-01
## The null hypothesis test was non-significant W = 25.500, p = 6.93e-02
## NHST: don't reject null significance hypothesis that the effect is equal to zero
## TOST: don't reject null equivalence hypothesis
##
## TOST Results
## Test Statistic p.value
## NHST 25.5 0.069
## TOST Lower 34.0 0.894
## TOST Upper 20.0 0.013
##
## Effect Sizes
## Estimate C.I. Conf. Level
## Median of Differences -1.346 [-3.4, -0.1] 0.9
## Rank-Biserial Correlation -0.490 [-0.7493, -0.1005] 0.9
```

The standardized effect size reported for the
`wilcox_TOST`

procedure is the rank-biserial correlation.
This is a fairly intuitive measure of effect size which has the same
interpretation of the common language effect size (Kerby 2014). However, instead of assuming
normality and equal variances, the rank-biserial correlation calculates
the number of favorable (positive) and unfavorable (negative) pairs
based on their respective ranks.

For the two sample case, the correlation is calculated as the proportion of favorable pairs minus the unfavorable pairs.

\[ r_{biserial} = f_{pairs} - u_{pairs} \]

For the one sample or paired samples cases, the correlation is
calculated with ties (values equal to zero) not being dropped. This
provides a *conservative* estimate of the rank biserial
correlation.

It is calculated in the following steps wherein \(z\) represents the values or difference between paired observations:

- Calculate signed ranks:

\[ r_j = -1 \cdot sign(z_j) \cdot rank(|z_j|) \] 2. Calculate the positive and negative sums:

\[ R_{+} = \sum_{1\le i \le n, \space z_i > 0}r_j \]

\[ R_{-} = \sum_{1\le i \le n, \space z_i < 0}r_j \] 3. Determine the smaller of the two rank sums:

\[ T = min(R_{+}, \space R_{-}) \]

\[ S = \begin{cases} -4 & R_{+} \ge R_{-} \\ 4 & R_{+} < R_{-} \end{cases} \] 4. Calculate rank-biserial correlation:

\[ r_{biserial} = S \cdot | \frac{\frac{T - \frac{(R_{+} + R_{-})}{2}}{n}}{n + 1} | \]

The Fisher approximation is used to calculate the confidence intervals.

For paired samples, or one sample, the standard error is calculated as the following:

\[ SE_r = \sqrt{ \frac {(2 \cdot nd^3 + 3 \cdot nd^2 + nd) / 6} {(nd^2 + nd) / 2} } \]

wherein, nd represents the total number of observations (or pairs).

For independent samples, the standard error is calculated as the following:

\[ SE_r = \sqrt{\frac {(n1 + n2 + 1)} { (3 \cdot n1 \cdot n2)}} \]

The confidence intervals can then be calculated by transforming the estimate.

\[ r_z = atanh(r_{biserial}) \]

Then the confidence interval can be calculated and back transformed.

\[ r_{CI} = tanh(r_z \pm Z_{(1 - \alpha / 2)} \cdot SE_r) \]

Two other effect sizes can be calculated for non-parametric tests.
First, there is the concordance probability, which is also known at the
c-statistic, c-index, or probability of superiority^{1}. The c-statistic is
converted from the correlation using the following formula:

\[ c = \frac{(r_{biserial} + 1)}{2} \]

The Wilcoxon-Mann-Whitney odds (O’Brien and Castelloe 2006), also known as the “Generalized Odds Ratio” (Agresti 1980), is calculated by converting the c-statistic using the following formula:

\[ WMW_{odds} = e^{logit(c)} \]

Either effect size is available by simply modifying the
`ses`

argument for the `wilcox_TOST`

function.

```
# Rank biserial
wilcox_TOST(formula = extra ~ group,
data = sleep,
paired = FALSE,
ses = "r",
eqb = .5)
```

```
##
## Wilcoxon rank sum test with continuity correction
##
## The equivalence test was non-significant W = 20.000, p = 8.94e-01
## The null hypothesis test was non-significant W = 25.500, p = 6.93e-02
## NHST: don't reject null significance hypothesis that the effect is equal to zero
## TOST: don't reject null equivalence hypothesis
##
## TOST Results
## Test Statistic p.value
## NHST 25.5 0.069
## TOST Lower 34.0 0.894
## TOST Upper 20.0 0.013
##
## Effect Sizes
## Estimate C.I. Conf. Level
## Median of Differences -1.346 [-3.4, -0.1] 0.9
## Rank-Biserial Correlation -0.490 [-0.7493, -0.1005] 0.9
```

```
##
## Wilcoxon rank sum test with continuity correction
##
## The equivalence test was non-significant W = 20.000, p = 8.94e-01
## The null hypothesis test was non-significant W = 25.500, p = 6.93e-02
## NHST: don't reject null significance hypothesis that the effect is equal to zero
## TOST: don't reject null equivalence hypothesis
##
## TOST Results
## Test Statistic p.value
## NHST 25.5 0.069
## TOST Lower 34.0 0.894
## TOST Upper 20.0 0.013
##
## Effect Sizes
## Estimate C.I. Conf. Level
## Median of Differences -1.3464 [-3.4, -0.1] 0.9
## WMW Odds 0.3423 [0.1433, 0.8173] 0.9
```

```
# Concordance
wilcox_TOST(formula = extra ~ group,
data = sleep,
paired = FALSE,
ses = "c",
eqb = .5)
```

```
##
## Wilcoxon rank sum test with continuity correction
##
## The equivalence test was non-significant W = 20.000, p = 8.94e-01
## The null hypothesis test was non-significant W = 25.500, p = 6.93e-02
## NHST: don't reject null significance hypothesis that the effect is equal to zero
## TOST: don't reject null equivalence hypothesis
##
## TOST Results
## Test Statistic p.value
## NHST 25.5 0.069
## TOST Lower 34.0 0.894
## TOST Upper 20.0 0.013
##
## Effect Sizes
## Estimate C.I. Conf. Level
## Median of Differences -1.346 [-3.4, -0.1] 0.9
## Concordance 0.255 [0.1254, 0.4497] 0.9
```

As Karch (2021) explained, there are
some reasons to dislike the WMW family of tests as the non-parametric
alternative to the t-test. Regardless of the underlying statistical
arguments^{2}, it can be argued that the interpretation
of the WMW tests, especially when involving equivalence testing, is a
tad difficult. Some may want a non-parametric alternative to the WMW
test, and the Brunner-Munzel test(s) may be a useful option.

The Brunner-Munzel test (Brunner and Munzel 2000; Neubert and Brunner 2007) is based on calculating the “stochastic superiority” (Karch 2021, i.e., probability of superiority), which is usually referred to as the relative effect, based on the ranks of the two groups being compared (X and Y). A Brunner-Munzel type test is then a directional test of an effect, and answers a question akin to “what is the probability that a randomly sampled value of Y will be greater than X?”

\[ \hat p = P(X<Y) + 0.5 \cdot P(X=Y) \]

In this section, I will quickly detail the calculative approach that
underlies the Brunner-Munzel test in `TOSTER`

.

A studentized test statistic can be calculated as:

\[
t = \sqrt{N} \cdot \frac{\hat p -p_{null}}{s}
\] Wherein the default null hypothesis \(p_{null}\) is typically 0.5 (50%
probability of superiority is the default null), and \(\sigma_N\) refers the rank-based
Brunner-Munzel standard error. The null can be modified therefore
allowing for equivalence testing *directly based on the relative
effect*. Additionally, for paired samples the probability of
superiority is based on a *hypothesis of exchangability* and is
not based on the differences scores^{3}.

For more details on the calculative approach, I suggest reading Karch (2021). At small sample sizes, it is
recommended that the permutation version of the test
(`perm = TRUE`

) be used rather than the basic test statistic
approach.

The interface for the function is very similar to the
`t.test`

function. The `brunner_munzel`

function
itself does not allow for equivalence tests, but you can set an
alternative hypothesis for “two.sided”, “less”, or “greater”.

`## Sample size in at least one group is small. Permutation test (perm = TRUE) is highly recommended.`

```
##
## two-sample Brunner-Munzel test
##
## data: extra by group
## t = -2.1447, df = 16.898, p-value = 0.04682
## alternative hypothesis: true relative effect is not equal to 0.5
## 95 percent confidence interval:
## 0.01387048 0.49612952
## sample estimates:
## p(X<Y) + .5*P(X=Y)
## 0.255
```

```
##
## two-sample Brunner-Munzel permutation test
##
## data: extra by group
## t = -2.1447, df = 16.898, p-value = 0.0482
## alternative hypothesis: true relative effect is not equal to 0.5
## 95 percent confidence interval:
## 0.00826466 0.49593164
## sample estimates:
## p(X<Y) + .5*P(X=Y)
## 0.255
```

The `simple_htest`

function allows TOST tests using a
Brunner-Munzel test by setting the alternative to “equivalence” or
“minimal.effect”. The equivalence bounds, based on the relative effect,
can be set with the `mu`

argument.

```
# permutation based Brunner-Munzel test of equivalence
simple_htest(formula = extra ~ group,
test = "brunner",
data = sleep,
paired = FALSE,
alternative = "equ",
mu = .7,
perm = TRUE)
```

```
##
## two-sample Brunner-Munzel permutation test
##
## data: extra by group
## t = -3.8954, df = 16.898, p-value = 0.9974
## alternative hypothesis: equivalence
## null values:
## relative effect relative effect
## 0.3 0.7
## 90 percent confidence interval:
## 0.05824864 0.45564662
## sample estimates:
## p(X<Y) + .5*P(X=Y)
## 0.255
```

The bootstrap is a simulation based technique, derived from
re-sampling with replacement, designed for statistical estimation and
inference. Bootstrapping techniques are very useful because they are
considered somewhat robust to the violations of assumptions for a simple
t-test. Therefore we added a bootstrap option, `boot_t_TOST`

to the package to provide another robust alternative to the
`t_TOST`

function.

In this function, we provide the percentile bootstrap solution
outlined by Efron and Tibshirani (1993)
(see chapter 16, page 220). The bootstrapped p-values are derived from
the “studentized” version of a test of mean differences outlined by
Efron and Tibshirani (1993). Overall, the
results should be similar to the results of `t_TOST`

.
**However**, for paired samples, the Cohen’s d(rm) effect
size *cannot* be calculated.

Form B bootstrap data sets from x* and y* wherein x* is sampled with replacement from \(\tilde x_1,\tilde x_2, ... \tilde x_n\) and y* is sampled with replacement from \(\tilde y_1,\tilde y_2, ... \tilde y_n\)

t is then evaluated on each sample, but the mean of each sample (y or x) and the overall average (z) are subtracted from each

\[ t(z^{*b}) = \frac {(\bar x^*-\bar x - \bar z) - (\bar y^*-\bar y - \bar z)}{\sqrt {sd_y^*/n_y + sd_x^*/n_x}} \]

- An approximate p-value can then be calculated as the number of bootstrapped results greater than the observed t-statistic from the sample.

\[ p_{boot} = \frac {\#t(z^{*b}) \ge t_{sample}}{B} \]

The same process is completed for the one sample case but with the one sample solution for the equation outlined by \(t(z^{*b})\). The paired sample case in this bootstrap procedure is equivalent to the one sample solution because the test is based on the difference scores.

We can use the sleep data to see the bootstrapped results. Notice that the plots show how the re-sampling via bootstrapping indicates the instability of Hedges’ d(z).

```
data('sleep')
test1 = boot_t_TOST(formula = extra ~ group,
data = sleep,
paired = TRUE,
eqb = .5,
R = 999)
print(test1)
```

```
##
## Bootstrapped Paired t-test
##
## The equivalence test was non-significant, t(9) = -2.777, p = 1e+00
## The null hypothesis test was significant, t(9) = -4.062, p = 0e+00
## NHST: reject null significance hypothesis that the effect is equal to zero
## TOST: don't reject null equivalence hypothesis
##
## TOST Results
## t df p.value
## t-test -4.062 9 < 0.001
## TOST Lower -2.777 9 1
## TOST Upper -5.348 9 < 0.001
##
## Effect Sizes
## Estimate SE C.I. Conf. Level
## Raw -1.580 0.3743 [-2.27, -1.04] 0.9
## Hedges's g(z) -1.174 0.7553 [-2.9951, -0.9198] 0.9
## Note: percentile bootstrap method utilized.
```

In many bioequivalence studies, the differences between drugs are compared on the log scale (He et al. 2022). The log scale allows researchers to compare the ratio of two means.

\[
log ( \frac{y}{x} ) = log(y) - log(x)
\] The United
States Food and Drug Administration (FDA)^{4} hs stated a rationale
for using the log transformed values:

Using logarithmic transformation, the general linear statistical model employed in the analysis of BE data allows inferences about the difference between the two means on the log scale, which can then be retransformed into inferences about the ratio of the two averages (means or medians) on the original scale. Logarithmic transformation thus achieves a general comparison based on the ratio rather than the differences.

In addition, the FDA, considers two drugs as bioequivalent when the ratio between x and y is less than 1.25 and greater than 0.8 (1/1.25), which is the default equivalence bound for the log functions.

For example, we could compare whether the cars of different
transmissions are “equivalent” with regards to gas mileage. We can use
the default equivalence bounds (`eqb = 1.25`

).

```
##
## Log-transformed Welch Two Sample t-test
##
## The equivalence test was non-significant, t(23.96) = -1.363, p = 9.07e-01
## The null hypothesis test was significant, t(23.96) = -3.826, p = 8.19e-04
## NHST: reject null significance hypothesis that the effect is equal to one
## TOST: don't reject null equivalence hypothesis
##
## TOST Results
## t df p.value
## t-test -3.826 23.96 < 0.001
## TOST Lower -1.363 23.96 0.907
## TOST Upper -6.288 23.96 < 0.001
##
## Effect Sizes
## Estimate SE C.I. Conf. Level
## log(Means Ratio) -0.3466 0.09061 [-0.5017, -0.1916] 0.9
## Means Ratio 0.7071 NA [0.6055, 0.8256] 0.9
```

Note, that the function produces t-tests similar to the
`t_TOST`

function, but provides two effect sizes. The means
ratio on the log scale (the scale of the test statistics), and the means
ratio. The means ratio is missing standard error because the confidence
intervals and estimate are simply the log scale results
exponentiated.

However, it has been noted in the statistics literature that t-tests
on the logarithmic scale can be biased, and it is recommended that
bootstrapped tests be utilized instead. Therefore, the
`boot_log_TOST`

function can be utilized to perform a more
precise test.

```
##
## Bootstrapped Log Welch Two Sample t-test
##
## The equivalence test was non-significant, t(23.96) = -1.363, p = 9.46e-01
## The null hypothesis test was significant, t(23.96) = -3.826, p = 0e+00
## NHST: reject null significance hypothesis that the effect is equal to 1
## TOST: don't reject null equivalence hypothesis
##
## TOST Results
## t df p.value
## t-test -3.826 23.96 < 0.001
## TOST Lower -1.363 23.96 0.946
## TOST Upper -6.288 23.96 < 0.001
##
## Effect Sizes
## Estimate SE C.I. Conf. Level
## log(Means Ratio) -0.3466 0.08641 [-0.4907, -0.2109] 0.9
## Means Ratio 0.7071 0.06104 [0.6122, 0.8098] 0.9
## Note: percentile bootstrap method utilized.
```

It was requested that a function be provided that only calculates a
robust effect size. Therefore, I created the `ses_calc`

function as robust effect size calculation. The interface is almost the
same as `wilcox_TOST`

but you don’t set an equivalence
bound.

```
## estimate lower.ci upper.ci conf.level
## Rank-Biserial Correlation 0.9818182 0.928369 0.9954785 0.95
```

Agresti, Alan. 1980. “Generalized Odds Ratios for Ordinal
Data.” *Biometrics*, 59–67. https://doi.org/10.2307/2530495.

Brunner, Edgar, and Ullrich Munzel. 2000. “The Nonparametric
Behrens-Fisher Problem: Asymptotic Theory and a Small-Sample
Approximation.” *Biometrical Journal* 42 (1): 17–25. https://doi.org/10.1002/(sici)1521-4036(200001)42:1<17::aid-bimj17>3.0.co;2-u.

Efron, Bradley, and Robert J. Tibshirani. 1993. *An Introduction to
the Bootstrap*. Monographs on Statistics and Applied Probability 57.
Boca Raton, Florida, USA: Chapman & Hall/CRC.

He, Y, Y Deng, C You, and X H Zhou. 2022. “Equivalence Tests for
Ratio of Means in Bioequivalence Studies Under Crossover
Designs.” *Statistical Methods in Medical Research*,
09622802221093721. https://doi.org/10.1177/09622802221093721.

Karch, Julian D. 2021. “Psychologists Should Use Brunner-Munzel’s
Instead of Mann-Whitney’s \(\less\)i\(\greater\)u\(\less\)/i\(\greater\) Test as the Default
Nonparametric Procedure.” *Advances in Methods and Practices
in Psychological Science* 4 (2): 251524592199960. https://doi.org/10.1177/2515245921999602.

Kerby, Dave S. 2014. “The Simple Difference Formula: An Approach
to Teaching Nonparametric Correlation.” *Comprehensive
Psychology* 3 (January): 11.IT.3.1. https://doi.org/10.2466/11.it.3.1.

Neubert, Karin, and Edgar Brunner. 2007. “A Studentized
Permutation Test for the Non-Parametric Behrensfisher
Problem.” *Computational Statistics &Amp\(\mathsemicolon\) Data Analysis* 51
(10): 5192–5204. https://doi.org/10.1016/j.csda.2006.05.024.

O’Brien, Ralph G, and John Castelloe. 2006. “Exploiting the Link
Between the Wilcoxon-Mann-Whitney Test and a Simple Odds
Statistic,” 209–31.

Directly inspired by this blog post from Professor Frank Harrell https://hbiostat.org/blog/post/wpo/↩︎

I would like to note that I think the statistical properties of the WMW tests are sound, and Frank Harrell has written many blogposts outlined their sound application in biomedicine. ↩︎

This means the relative effect will

*not*match the concordance probability provided by`ses_calc`

↩︎Food and Drug Administration (2014). Bioavailability and Bioequivalence Studies Submitted in NDAs or INDs — General Considerations.Center for Drug Evaluation and Research. Docket: FDA-2014-D-0204↩︎