geosapi User Manual

geosapi - R Interface to GeoServer REST API

R Interface to GeoServer REST API – Allows to perform programmatically from R


If you wish to sponsor geosapi, do not hesitate to contact me

Many thanks to the following organizations that have provided fundings for strenghtening the geosapi package:


Table of contents

1. Overview
2. Package status
3. Credits
4. User guide
   4.1 Installation
   4.2 Connect to GeoServer REST API
   4.3 GeoServer workspaces
      4.3.1 Get a (list of) workspace(s)
      4.3.2 Create a new workspace
      4.3.3 Update a new workspace
      4.3.4 Delete a new workspace
   4.4 GeoServer namespaces
      4.4.1 Get a (list of) namespace(s)
      4.4.2 Create a new namespace
      4.4.3 Update a new namespace
      4.4.4 Delete a new namespace
   4.5 Manage vector data in GeoServer
      4.5.1 GeoServer dataStores
         4.5.1.1 Get a (list of) dataStore(s)
         4.5.1.2 Create a new dataStore
            4.5.1.2.1 Create a Shapefile dataStore
            4.5.1.2.2 Create a Shapefiles Directory dataStore
            4.5.1.2.3 Create a GeoPackage dataStore
         4.5.1.3 Update a new dataStore
         4.5.1.4 Delete a new dataStore
      4.5.2 Upload features/vector data
      4.5.3 GeoServer featureTypes
         4.5.3.1 Get a (list of) featureType(s)
         4.5.3.2 Create a new featureType
         4.5.3.3 Update a new featureType
         4.5.3.4 Delete a new featureType
      4.5.3 GeoServer layers
         4.5.4.1 Get a (list of) layer(s)
         4.5.4.2 Create a new layer
         4.5.4.3 Update a new layer
         4.5.4.4 Delete a new layer
      4.5.5 Publication of GeoServer feature layer
         4.5.5.1 Publish Geoserver feature layer
         4.5.5.2 Unpublish Geoserver feature layer
      4.5.6 GeoServer layer groups
         4.5.6.1 Get a (list of) layer group(s)
         4.5.6.2 Create a new layer group
         4.5.6.3 Update a new layer group
         4.5.6.4 Delete a new layer group
   4.6 Manage raster data in GeoServer
      4.6.1 GeoServer coveragestores
         4.6.1.1 Get a (list of) coveragestore(s)
         4.6.1.2 Create a new coveragestore
            4.6.1.2.1 Create a GeoTIFF coveragestore
            4.6.1.2.2 Create a WorldImage coveragestore
            4.6.1.2.3 Create a ArcGrid coveragestore
            4.6.1.2.4 Create a ImageMosaic coveragestore
         4.6.1.3 Update a new coveragestore
         4.6.1.4 Delete a new coveragetore
      4.6.2 Upload coverage/raster data
      4.6.3 GeoServer coverages
         4.6.3.1 Get a (list of) coverage(s)
         4.6.3.2 Create a new coverage
         4.6.3.3 Update a new coverage
         4.6.3.4 Delete a new coverage
   4.7 Manage styles in GeoServer
      4.7.1 Get a (list of) style(s)
      4.7.2 Create a new style
      4.7.3 Update a new style
      4.7.4 Delete a new style
   4.8 Manage workspace settings in GeoServer
      4.8.1 Create a workspace settings
      4.8.2 Get a workspace settings
      4.8.3 Update a workspace settings
      4.8.4 Delete a workspace settings
   4.9 Manage OGC service (WMS/WFS/WCS) settings in GeoServer
      4.9.1 Get an OGC service (WMS/WFS/WCS) settings
      4.9.2 Update an OGC service (WMS/WFS/WCS) settings
      4.9.3 Enable/Disable an OGC service (WMS/WFS/WCS)
5. Issue reporting

1. Overview and vision


Until now, equivalent tools were existing for other programming languages (e.g. Java, Python) but not in R. geosapi intends to provide R native interface to the GeoServer REST API, in order to facilitate publication of geographic data resources from R to GeoServer.

2. Development status


Published on CRAN

3. Credits


© 2016, Emmanuel Blondel

Package distributed under MIT license.

If you use geosapi, i would be very grateful if you can add a citation in your published work. By citing geosapi, beyond acknowledging the work, you contribute to make it more visible and guarantee its growing and sustainability. You can get the preferred citation by running citation("geosapi) in R.

You can reference geosapi through its DOI: DOI

4. User guide


4.1 How to install geosapi in R

For now, the package can be installed from Github

install.packages("remotes")

Once the devtools package loaded, you can use the install_github to install geosapi. By default, package will be installed from master`` which is the current version in development (likely to be unstable).

remotes::install_github("eblondel/geosapi")

4.2 Connect to GeoServer REST API

The main entry point of geosapi is the GSManager. To configure it, enter the following line, specifying the base URL of your GeoServer, and your credentials:

gsman <- GSManager$new(
    url = "http://localhost:8080/geoserver", #baseUrl of the Geoserver
    user = "admin", pwd = "geoserver", #credentials
    logger = NULL #logger, for info or debugging purpose
)

By default, the geosapi logger is deactivated. To enable the logger, specify the level of log you wish as parameter of the above R code. Two logging levels are available:

The GSManager inherits all methods of resource dependent managers, to provide the users with a single R interface to GeoServer REST API operations. In addition, the GSManager allows accessing the different resource managers through specific methods. The following managers are available:

4.3 Manipulate GeoServer workspaces

GeoServer API doc: https://docs.geoserver.org/stable/en/user/rest/api/workspaces.html

4.3.1 Get a (list of) workspace(s)
  #get workspace objects
  wslist <- gsman$getWorkspaces()

  #get workspace names only
  wsnames <- gsman$getWorkspaceNames()

  #get workspace by name
  ws <- gsman$getWorkspace("topp")
4.3.2 Create a new workspace
  created <- gsman$createWorkspace("geosapi", "http://geoapi")
4.3.3 Update an existing workspace
  updated <- gsman$updateWorkspace("geosapi", "http://newgeoapi")
4.3.4 Delete an existing workspace
  deleted <- gsman$deleteWorkspace("geosapi", recurse = TRUE)

The recurse parameter allows to delete all layers published under the deleted workspace.

4.4 Manipulate GeoServer namespaces

GeoServer API doc: https://docs.geoserver.org/stable/en/user/rest/api/namespaces.html

4.4.1 Get a (list of) namespace(s)
  #get namespace objects
  nslist <- gsman$getNamespaces()

  #get namespace names only
  nsnames <- gsman$getNamespaceNames()

  #get namespace by name
  ns <- gsman$getNamespace("topp")
4.4.2 Create a new namespace
  created <- gsman$createNamespace("geosapi", "http://geoapi")
4.4.3 Update an existing namespace
  updated <- gsman$updateNamespace("geosapi", "http://newgeoapi")
4.4.4 Delete an existing namespace
  deleted <- gsman$deleteNamespace("geosapi", recurse = TRUE)

The recurse parameter allows to delete all layers published under the deleted namespace.

4.5 Manage vector data with GeoServer

4.5.1 Manipulate GeoServer dataStores

GeoServer API doc: https://docs.geoserver.org/stable/en/user/rest/api/datastores.html

4.5.1.1 Get a (list of) dataStore(s)
  #get datastore objects
  dslist <- gsman$getDataStores("topp")

  #get datastore names only
  dsnames <- gsman$getDataStoreNames("topp")

  #get datastore by name
  ns <- gsman$getDataStore("topp", "states_shapefile")
4.5.1.2 Create a new dataStore
  ds = GSShapefileDataStore$new(dataStore="topp_datastore",
                                description = "topp_datastore description",
                                enabled = TRUE,
                                url = "file:data/shapefiles/states.shp")
  created <- gsman$createDataStore("topp", ds)
  ds = GSShapefileDirectoryDataStore$new(dataStore="topp_datastore",
                                description = "topp_datastore description",
                                enabled = TRUE,
                                url = "file:data/shapefiles")
  created <- gsman$createDataStore("topp", ds)
  ds = GSGeoPackageDataStore$new(dataStore="topp_datastore",
                                description = "topp_datastore description",
                                enabled = TRUE,
                                database = "file:data/somefile.gpkg")
  created <- gsman$createDataStore("topp", ds)
4.5.1.3 Update an existing dataStore
  dataStore <- gsman$getDataStore("topp", "topp_datastore")
  dataStore$setDescription("topp_datastore updated description")
  dataStore$setEnabled(FALSE)
  
  updated <- gsman$updateDataStore("topp", dataStore)
4.5.1.4 Delete an existing dataStore
  deleted <- gsman$deleteDataStore("topp", "topp_datastore", recurse = TRUE)

The recurse parameter allows to delete all layers published under the deleted datastore.

4.5.2 Upload features/vector data

The geosapi offers methods to upload vector data to configured datastores. A generic method gsman$uploadData allows to upload any kind of data type supported by GeoServer, by specifying the file extension. To upload data, several parameters have to be specified including:

To simplify the upload, several data-specific methods were designed targeting specific data file extensions. These methods share the same parameters as above except the extension and contentType that will be pre-set according to the data upload format:

Example with an OGC Geopackage upload

  uploaded <- gsman$uploadGeoPackage(
	ws = "my_workspace", ds = "my_gpkg_datastore",
	endpoint = "file", configure = "first", update = "overwrite",
	charset = "UTF-8", filename = "myfile.gpkg"
  )
4.5.3 Manipulate GeoServer featureType

GeoServer API doc: https://docs.geoserver.org/stable/en/user/rest/api/featuretypes.html

4.5.3.1 Get a (list of) featureType(s)
  #get featureType objects
  ftlist <- gsman$getFeatureTypes("topp", "taz_shapes")

  #get featureType names only
  ftnames <- gsman$getFeatureTypeNames()

  #get featureType by name
  ft <- gsman$getFeatureType("topp", "taz_shapes", "tasmania_cities")
4.5.3.2 Create a new featureType
  #create featuretype object
  featureType <- GSFeatureType$new()
  featureType$setName("tasmania_cities2")
  featureType$setNativeName("tasmania_cities")
  featureType$setAbstract("abstract")
  featureType$setTitle("title")
  featureType$setSrs("EPSG:4326")
  featureType$setNativeCRS("EPSG:4326")
  featureType$setEnabled(TRUE)
  featureType$setProjectionPolicy("REPROJECT_TO_DECLARED")
  featureType$setLatLonBoundingBox(-180,-90,180,90, crs = "EPSG:4326")
  featureType$setNativeBoundingBox(-180,-90,180,90, crs ="EPSG:4326") 
  
  md1 <- GSMetadataLink$new(type = "text/xml", metadataType = "ISO19115:2003", content = "http://somelink.org/xml")
  featureType$addMetadataLink(md1)
  md2 <- GSMetadataLink$new(type = "text/html", metadataType = "ISO19115:2003", content = "http://somelink.org/html")
  featureType$addMetadataLink(md2)

  #create the feature type in GeoServer
  created <- gsman$createFeatureType("topp", "taz_shapes", featureType)

How to set a Geoserver SQL View

With geosapi, it is also possible to configure a Geoserver SQL View, possibly with dynamic parameters. For this, GeoServer uses the concept of VirtualTable. The code below explains how to configure such virtual table with geosapi:


##virtual table
vt <- GSVirtualTable$new()
vt$setName("view name")
vt$setSql("select * from mydataset where flag = '%flag%' and year between %start_year% and %end_year%")

## incase of spatial virtual table, specify the geometry column name, type and SRID
vtg <- GSVirtualTableGeometry$new(name = "the_geom", type = "MultiPolygon", srid = 4326)
vt$setGeometry(vtg)

##in case of dynamic parameters handled in your sql (bound with %)
vtp1 <- GSVirtualTableParameter$new(name = "flag", defaultValue = "FRA", regexpValidator = "^[\\w\\d\\s]+$")
vtp2 <- GSVirtualTableParameter$new(name = "start_year", defaultValue = "2000",regexpValidator = "^[\\d]+$")
vtp3 <- GSVirtualTableParameter$new(name = "end_year", defaultValue = "2010",regexpValidator = "^[\\d]+$")
vt$addParameter(vtp1)
vt$addParameter(vtp2)
vt$addParameter(vtp3)

##add virtual table to featureType
featureType$setVirtualTable(vt)
4.5.3.3 Update an existing featureType
  #fetch featureType and update some properties
  featureType <- gsman$getFeatureType("topp", "taz_shapes", "tasmania_cities2")
  featureType$setAbstract("abstract updated")
  featureType$setEnabled(FALSE)
  
  #update featureType in GeoServer
  updated <- gsman$updateFeatureType("topp", "taz_shapes", featureType)
4.5.3.4 Delete an existing featureType
  deleted <- gsman$deleteFeatureType("topp", "taz_shapes", "tasmania_cities2", recurse = TRUE)

The recurse parameter allows to delete the layer published for the deleted featureType.

4.5.4 Manipulate GeoServer layers

GeoServer API doc: https://docs.geoserver.org/stable/en/user/rest/api/layers.html

4.5.4.1 Get a (list of) layer(s)
  #get layer objects
  layers <- gsman$getLayers()

  #get layer names only
  layerNames <- gsman$getLayerNames()

  #get layer by name
  layer <- gsman$getLayer("tasmania_cities")
4.5.4.2 Create a new layer

This method shows how to publish a created featureType (as created in 4.5.3 Create a new FeatureType)

  layer <- GSLayer$new()
  layer$setName("tasmania_cities2")
  layer$setDefaultStyle("capitals")
  layer$addStyle("generic")
  created <- gsman$createLayer(layer)
4.5.4.3 Update an existing layer
  lyr <- gsman$getLayer("tasmania_cities")
  lyr$setDefaultStyle("generic")
  updated <- gsman$updateLayer(lyr)
4.5.4.4 Delete an existing layer
  deleted <- gsman$deleteLayer("tasmania_cities2")
4.5.5 Publication of GeoServer feature layer

GeoServer manages feature data layers by means of two different types of resources: the featureType and the layer. When created, the latter will publish the former. Hence, in order to publish a complete feature data layer, two GeoServer resources should be created. The below methods allow the user to do both creation through a single method. To distinguish them from the above API methods and avoid confusion, we don’t use the terminology create / delete but publish / unpublish.

4.5.5.1 Publish Geoserver feature layer

The method publishLayer will sequentially do two requests to GeoServer:

  #create featuretype
  featureType <- GSFeatureType$new()
  featureType$setName("tasmania_cities2")
  featureType$setNativeName("tasmania_cities")
  featureType$setAbstract("abstract")
  featureType$setTitle("title")
  featureType$setSrs("EPSG:4326")
  featureType$setNativeCRS("EPSG:4326")
  featureType$setEnabled(TRUE)
  featureType$setProjectionPolicy("REPROJECT_TO_DECLARED")
  featureType$setLatLonBoundingBox(-180,-90,180,90, crs = "EPSG:4326")
  featureType$setNativeBoundingBox(-180,-90,180,90, crs ="EPSG:4326") 
  md1 <- GSMetadataLink$new(type = "text/xml", metadataType = "ISO19115:2003", content = "http://somelink.org/xml")
  featureType$addMetadataLink(md1)
  md2 <- GSMetadataLink$new(type = "text/html", metadataType = "ISO19115:2003", content = "http://somelink.org/html")
  featureType$addMetadataLink(md2)
  
  #create layer
  layer <- GSLayer$new()
  layer$setName("tasmania_cities2")
  layer$setDefaultStyle("capitals")
  layer$addStyle("generic")
  
  #try to publish the complete layer (featuretype + layer)
  published <- gsman$publishLayer("topp", "taz_shapes", featureType, layer)
4.5.5.2 Unpublish Geoserver feature layer

The method publishLayer will sequentially do two requests to GeoServer:

  #try to unpublish the complete layer (featuretype + layer)
  published <- gsman$unpublishLayer("topp", "taz_shapes", "tasmania_cities2")
4.5.6 Manipulate GeoServer layer groups

GeoServer API doc: https://docs.geoserver.org/stable/en/user/rest/api/layergroups.html

4.5.6.1 Get a (list of) layer group(s)
  #get layer groups objects
  layerGroups <- gsman$getLayerGroups()

  #get layer group names only
  layerGroupNames <- gsman$getLayerGroupNames()

  #get layer group by name
  layerGroup <- gsman$getLayerGroup("test_layergroup")
4.5.6.2 Create a new layer group
  lyr <- GSLayerGroup$new()
  lyr$setName("test_layergroup")
  lyr$setTitle("title")
  lyr$setAbstract("abstract")
  lyr$setMode("SINGLE")
  lyr$addLayer(layer = "tasmania_cities", style = "generic")
  lyr$setBounds(-180,-90,180,90,crs = "EPSG:4326")
  gsman$createLayerGroup(layerGroup = lyr)
4.5.6.3 Update an existing layer group
  lyr <- GSLayerGroup$new()
  lyr$setName("test_layergroup")
  lyr$setTitle("title")
  lyr$setAbstract("abstract 2")
  lyr$setMode("SINGLE")
  lyr$addLayer(layer = "tasmania_cities", style = "generic")
  lyr$setBounds(-180,-90,180,90,crs = "EPSG:4326")
  gsman$updateLayerGroup(layerGroup = lyr)
4.5.6.4 Delete an existing layer group
  deleted <- gsman$deleteLayerGroup("test_layergroup")

4.6. Manage raster data with GeoServer

4.6.1 Manipulate GeoServer coveragestores

GeoServer API doc: https://docs.geoserver.org/stable/en/user/rest/api/coveragestores.html

4.6.1.1 Get a (list of) coveragestore(s)
  #get coveragestore objects
  cslist <- gsman$getCoverageStores("nurc")

  #get coveragestore names only
  csnames <- gsman$getCoverageStoreNames("nurc")

  #get coveragestore by name
  cs <- gsman$getCoverageStore("nurc", "mosaic")
4.6.1.2 Create a new coveragetore
  cs = GSGeoTIFFCoverageStore$new(name="sfdem_new", description = "sfdem_new description", enabled = TRUE)
  created <- gsman$createCoverageStore("sf", cs)
  cs = GSWorldImageCoverageStore$new(name="sfdem_new", description = "sfdem_new description", enabled = TRUE)
  created <- gsman$createCoverageStore("sf", cs)
  cs = GSArcGridCoverageStore$new(name="sfdem_new", description = "sfdem_new description", enabled = TRUE)
  created <- gsman$createCoverageStore("sf", cs)
  cs = GSImageMosaicCoverageStore$new(name="sfdem_new", description = "sfdem_new description", enabled = TRUE)
  created <- gsman$createCoverageStore("sf", cs)
4.6.1.3 Update an existing coveragestore
  cs <- gsman$getCoverageStore("sf", "sfdem")
  cs$setDescription("sfdem updated description")
  cs$setEnabled(FALSE)
  
  updated <- gsman$updateCoverageStore("sf", cs)
4.6.1.4 Delete an existing coveragestore
  deleted <- gsman$deleteCoverageStore("sf", "sfdem", recurse = TRUE)

The recurse parameter allows to delete all coverages published under the deleted coveragestore.

4.6.2 Upload coverage/raster data

The geosapi offers methods to upload coverage data to configured coveragestores. A generic method gsman$uploadCoverage allows to upload any kind of coverage data type supported by GeoServer, by specifying the file extension. To upload data, several parameters have to be specified including:

To simplify the upload, several coverage-specific methods were designed targeting specific data file extensions. These methods share the same parameters as above except the extension and contentType that will be pre-set according to the data upload format:

Example with a GeoTIFF upload

  uploaded <- gsman$uploadGeoTIFF(
	ws = "sf", cs = "sfdem_new",
    endpoint = "file", configure = "none", update = "overwrite",
    filename = system.file("extdata/sfdem_new.tif", package = "geosapi")
  )
4.6.3 Manipulate GeoServer coverages

GeoServer API doc: https://docs.geoserver.org/stable/en/user/rest/api/coverages.html

4.6.3.1 Get a (list of) coverage(s)
  #get coverage objects
  covlist <- gsman$getCoverages("sf", "sfdem")

  #get coverage names only
  covnames <- gsman$getCoverageNames("sf", "sfdem")

  #get coverage by name
  cov <- gsman$getCoverage("sf", "sfdem", "sfdem")
4.6.3.2 Create a new coverage
  #create coverage object
  cov <- GSCoverage$new()
  cov$setName("sfdem_new")
  cov$setNativeName("sfdem_new")
  cov$setTitle("Title for sfdem")
  cov$setDescription("Description for sfdem")
  cov$addKeyword("sfdem keyword1")
  cov$addKeyword("sfdem keyword2")
  cov$addKeyword("sfdem keyword3")
  
  md1 <- GSMetadataLink$new(
    type = "text/xml",
    metadataType = "ISO19115:2003",
    content = "http://somelink.org/sfdem_new/xml"
  )
  cov$addMetadataLink(md1)
  md2 <- GSMetadataLink$new(
    type = "text/html",
    metadataType = "ISO19115:2003",
    content = "http://somelink.org/sfdem_new/html"
  )
  cov$addMetadataLink(md2)
  
  cov$setSrs("EPSG:4326")
  cov$setNativeCRS("EPSG:26713")
  cov$setLatLonBoundingBox(-103.87108701853181, 44.370187074132616, -103.62940739432703, 44.5016011535299, crs = "EPSG:4326")
  cov$setNativeBoundingBox(589980, 4913700, 609000, 4928010, crs = "EPSG:26713")
  
  created <- gsman$createCoverage(ws = "sf", cs = "sfdem_new", coverage = cov)

How to set a Geoserver Coverage View

With geosapi, it is also possible to configure a Geoserver Coverage View. For this, GeoServer uses the concept of CoverageView. The code below explains how to configure such coverage view with geosapi:


  ##coverage view
  coview <- GSCoverageView$new()
  coview$setName("sfdem_new")
  coview$setEnvelopeCompositionType("INTERSECTION")
  coview$setSelectedResolution("BEST")
  coview$setSelectedResolutionIndex(-1)
  coviewband <- GSCoverageBand$new()
  coviewband$setDefinition("sfdem_new@0")
  coviewband$setIndex(0)
  coviewband$addInputBand(GSInputCoverageBand$new( coverageName = "sfdem_new", band = 0))
  coview$addBand(coviewband)

  ##add coverage view to coverage
  cov$setView(coview)
4.6.3.3 Update an existing coverage
  #fetch coverage and update some properties
  cov <- gsman$getCoverage("sf", "sfdem", "sfdem")
  cov$setAbstract("abstract updated")
  cov$setEnabled(FALSE)
  
  #update coverage in GeoServer
  updated <- gsman$updateCoverage("sf", "sfdem", cov)
4.6.3.4 Delete an existing coverage
  deleted <- gsman$deleteCoverage("sf", "sfdem", "sfdem", recurse = TRUE)

The recurse parameter allows to delete the layer published for the deleted featureType.

4.7. Manage styles with GeoServer

4.7.1 Get a (list of) style(s)
  styles <- gsman$getStyles()
  stylenames <- gsman$getStyleNames()
  style <- gsman$getStyle("capitals")

From GeoServer 2.2, it is also possible to get the content of a style, ie the SLD body:

  sld <- gsman$getSLDBody("capitals")
4.7.2 Create a new style
  sldFile <- system.file("extdata", "mystyle.sld", package = "geosapi") #to use 'file' argument of gsman$createStyle
  sldStyle <- xmlParse(sldFile) #to use 'sldBody' argument of gsman$createStyle
  created <- gsman$createStyle(file = sldFile, name = "mystyle")
4.7.3 Update a new style
  sldFile2 <- system.file("extdata", "mystyle2.sld", package = "geosapi") #to use 'file' argument of gsman$updateStyle
  sldStyle2 <- xmlParse(sldFile2) #to use 'sldBody' argument of gsman$updateStyle
  updated <- gsman$updateStyle(sldBody = sldStyle2, name = "mystyle")
4.7.4 Delete an existing style
  deleted <- gsman$deleteStyle("mystyle", recurse = TRUE, purge = TRUE)

All methods describe here above also support a ws argument where a workspace can be specified.

4.8. Manage workspace settings with GeoServer

Geoserver allows to activate settings by workspace. In such case, this will overwrite the global Geoserver settings. Activating these settings is required to set-up specific OGC service capabilities par workspace (see next section).

4.8.1 Create a workspace settings

Creating a workspace settings is equivalent to check the “Enabled” checkbox in the Settings section of a workspace edition page in the GeoServer UI. To create it (assuming a workspace named geosapi), run the following code:

settings <- GSWorkspaceSettings$new()
settings$setNumDecimals(5) #custom number of decimals for data published in this workspace
created <- gsman$createWorkspaceSettings("geosapi", settings)
4.8.2 Get a workspace settings

To get a workspace settings, use the following code:

geosapi_settings <- gsman$getWorkspaceSettings("geosapi")

This method can be used in view of updating a workspace settings.

4.8.3 Update a workspace settings

Similar method can be used for updating the workspace configuration:

settings <- gsman$getWorkspaceSettings("geosapi")
settings$setNumDecimals(9) #change number of decimals
created <- gsman$updateWorkspaceSettings("geosapi", settings)
4.8.4 Delete a workspace settings

The settings can be deleted (equivalent of unchecking the “Enabled” checkbox in a workspace settings section):

deleted <- gsman$deleteWorkspaceSettings("geosapi")

4.9 Manage OGC Service (WMS/WFS/WCS) settings with GeoServer

4.9.1 Get an OGC service (WMS/WFS/WCS) settings

To get an OGC service settings (global, or workspace specific), geosapi offers a generic method that can be used as follows:

#get WMS global settings
wms_global_settings <- gsman$getServiceSettings(service = "WMS")

#get WMS geosapi settings
wms_geosapi_settings <- gsman$getServiceSettings(service = "WMS", ws = "geosapi")

Shortcut methods can also be used as follow:

#get WMS global settings
wms_global_settings <- gsman$getWmsSettings()

#get WMS geosapi settings
wms_geosapi_settings <- gsman$getWmsSettings(ws = "geosapi")

Analog methods are available for WFS and WCS.

4.9.2 Update an OGC service (WMS/WFS/WCS) settings

OGC service settings can be updated, for example to activate/deactivate the service and fill minimum metadata (name, title, abstract). The following examples shows how to do update WMS global configuration and by workspace:

wmsSettings <- gsman$getWmsSettings()
wmsSettings$setTitle("Tile for my global WMS")
updated <- gsman$updateServiceSettings(wmsSettings, service = "WMS")

Shortcut update methods are also available. The last code line above can be replaced by:

updated <- gsman$updateWmsSettings(wmsSettings)
wmsSettings <- GSServiceSettings$new(service = "WMS")
wmsSettings$setTitle("Tile for my workspace WMS")
wmsSettings$setAbstract("This WMS is set-up specifically for the workspace geosapi")
updated <- gsman$updateServiceSettings(wmsSettings, service = "WMS", ws = "geosapi")

The last code line above could be replaced by the shortcut method:

updated <- gsman$updateWmsSettings(wmsSettings, ws = "geosapi")

4.9.3 Enable/Disable an OGC service (WMS/WFS/WCS)

To make OGC service enabling/disabling easier for users, additional shortcut methods were set-up in geosapi. The following code examples show you how to enable/disable WMS/WFS/WCS

#disable global WMS
gsman$disableWMS()
#enable global WFS and WCS
gsman$enableWFS()
gsman$enableWCS()
#activates WMS for workspace 'geosapi'
enabled <- gsman$enableWMS("geosapi")

#deactivates WMS for workspace 'geosapi'
disabled <- gsman$disableWMS("geosapi")

Analog functions are available for WFS and WCS:

#enable WFS and WCS for geosapi workspace
gsman$enableWFS("geosapi")
gsman$enableWCS("geosapi")
#disable WFS and WCS for geosapi workspace
gsman$disableWFS("geosapi")
gsman$disableWCS("geosapi")

5. Issue reporting


Issues can be reported at https://github.com/eblondel/geosapi/issues