Calculating shortest paths between pairs of nodes is a core task in
network analysis. The `sfnetworks`

package offers wrappers
around the path calculation functions of `igraph`

, making it
easier to use them when working with spatial data and tidyverse
packages. This vignette demonstrates their functionality.

In this regard it is important to remember that
`sfnetworks`

is a general-purpose package for spatial network
analysis, not specifically optimized for a single task. If your
*only* purpose is many-to-many routing in large networks, there
might be other approaches that are faster and fit better to your needs.
For example, the dodgr
package was designed for many-to-many routing on large dual-weighted
graphs, with its main focus on OpenStreetMap road network data. The cppRouting package
contains functions to calculate shortest paths and
isochrones/isodistances on weighted graphs. When working with
OpenStreetMap data, it is also possible to use the interfaces to
external routing engines such as graphhopper,
osrm and opentripplanner.
The stplanr package
for sustainable transport planning lets you use many routing engines
from a single interface, through `stplanr::route()`

,
including routing using local R objects. Of course, all these packages
can be happily used *alongside* `sfnetworks`

.

```
library(sfnetworks)
library(sf)
library(tidygraph)
library(dplyr)
library(purrr)
library(TSP)
```

The function `st_network_paths()`

is a wrapper around the
igraph function `igraph::shortest_paths()`

. There are two
main differences:

- Besides node indices and node names,
`st_network_paths()`

gives the additional option to provide any (set of) geospatial point(s) as*from*and*to*location(s) of the shortest paths, either as sf or sfc object. Provided points that do not equal any node in the network will be snapped to their nearest node before calculating the paths. - To allow smooth integration with the tidyverse, the output of
`st_network_paths()`

is a tibble, with one row per returned path. The column*node_paths*contains the ordered list of node indices in the path, and the column*edge_paths*contains the ordered list of edge indices in the path.

Just as `igraph::shortest_paths()`

, the
`st_network_paths()`

function is meant for one-to-one and
one-to-many routing. Hence, it is only possible to provide a single
*from* location, while the *to* locations can be more than
one.

Lets start with the most basic example of providing node indices as
*from* and *to* locations. Remember that a node index in a
sfnetwork refers to the position of the node in the nodes table of the
network (i.e. its row number). There is also the possibility to use
character encoded node names instead of numeric node indices. This
requires the nodes table to have a column *name* with a unique
name for each node.

We will use geographic edge lengths as the edge weights to be used
for shortest paths calculation. In weighted networks,
`igraph::shortest_paths()`

applies the Dijkstra algorithm to
find the shortest paths. In the case of unweighted networks, it uses
breadth-first search instead.

```
= as_sfnetwork(roxel, directed = FALSE) %>%
net st_transform(3035) %>%
activate("edges") %>%
mutate(weight = edge_length())
= st_network_paths(net, from = 495, to = c(458, 121), weights = "weight")
paths paths
```

```
#> # A tibble: 2 × 2
#> node_paths edge_paths
#> <list> <list>
#> 1 <int [29]> <int [28]>
#> 2 <int [33]> <int [32]>
```

```
%>%
paths slice(1) %>%
pull(node_paths) %>%
unlist()
#> [1] 495 485 244 402 166 18 195 181 68 100 169 170 182 101 103 547 546 554 556
#> [20] 555 86 61 88 531 543 90 229 527 458
%>%
paths slice(1) %>%
pull(edge_paths) %>%
unlist()
#> [1] 311 757 670 671 93 117 116 106 54 96 97 502 501 414 413 402 791 423 422
#> [20] 788 392 393 394 779 395 540 539 357
= function(node_path) {
plot_path %>%
net activate("nodes") %>%
slice(node_path) %>%
plot(cex = 1.5, lwd = 1.5, add = TRUE)
}
= sf.colors(3, categorical = TRUE)
colors
plot(net, col = "grey")
%>%
paths pull(node_paths) %>%
walk(plot_path)
%>%
net activate("nodes") %>%
st_as_sf() %>%
slice(c(495, 121, 458)) %>%
plot(col = colors, pch = 8, cex = 2, lwd = 2, add = TRUE)
```

Next we will create some geospatial points that do not intersect with
any node in the network. Providing them to
`st_network_paths()`

will first find the nearest node to each
of them, and then calculate the shortest paths accordingly.

```
= st_geometry(net, "nodes")[495] + st_sfc(st_point(c(50, -50)))
p1 st_crs(p1) = st_crs(net)
= st_geometry(net, "nodes")[458]
p2 = st_geometry(net, "nodes")[121] + st_sfc(st_point(c(-10, 100)))
p3 st_crs(p3) = st_crs(net)
= st_network_paths(net, from = p1, to = c(p2, p3), weights = "weight")
paths
plot(net, col = "grey")
%>%
paths pull(node_paths) %>%
walk(plot_path)
plot(c(p1, p2, p3), col = colors, pch = 8, cex = 2, lwd = 2, add = TRUE)
```

Simply finding the nearest node to given points is not always the
best way to go. For example: when a provided point is close to a
location on an edge linestring, but relatively far from any node, it
gives better results when the routing does not start at its nearest
node, but at that nearby location on the edge linestring. To accommodate
this, you can first *blend* your input points into the network,
and then proceed as normal. Blending is the name we gave to the combined
process of snapping a point to its nearest point on its nearest edge,
splitting the edge there, and adding the snapped point as node to the
network. It is implement in the function
`st_network_blend()`

. See the vignette on spatial
joins and filters for more details.

Another issue may arise wen your network consists of multiple
components that are not connected to each other. In that case, it is
possible that the nearest node to a provided point is located in a tiny
component and only a few other nodes can be reached from it. In such
cases it might be good to first reduce the network to its largest (or
*n* largest) component(s) before calculating shortest paths. The
tidygraph function `tidygraph::group_components()`

can help
with this. It assigns an integer to each node identifying the component
it is in, with `1`

being the largest component in the
network, `2`

the second largest, and so on.

```
# Our network consists of several unconnected components.
with_graph(net, graph_component_count())
#> [1] 14
= net %>%
connected_net activate("nodes") %>%
filter(group_components() == 1)
plot(net, col = colors[2])
plot(connected_net, cex = 1.1, lwd = 1.1, add = TRUE)
```

Another way to calculate shortest paths, which fits nicely in the
tidygraph style of working, is by using the
`to_spatial_shortest_paths()`

morpher function. This will
subset the original network to only contain those nodes and edges that
appear in a shortest path between two nodes. See the vignette on Spatial
morphers for details.

The shortest paths calculation as described above is only supported for one-to-one and one-to-many routing. The alternative for many-to-many routing is the calculation of an origin-destination cost matrix. Instead of providing the individual paths, it returns a matrix in which entry \(i,j\) is the total cost (i.e. sum of weights) of the shortest path from node \(i\) to node \(j\). The origin-destination cost matrix is usually an important starting point for further analysis. For example, it can serve as input to route optimization algorithms, spatial clustering algorithms and the calculation of statistical measures based on spatial proximity.

The igraph function for this purpose is
`igraph::distances()`

, which in `sfnetworks`

is
wrapped by `st_network_cost()`

, allowing again to provide
sets of geospatial points as *from* and *to* locations.
Note that the calculated costs refer to the paths between the
*nearest nodes* of the input points. Their units are the same as
the units of weights used in the calculation, in this case meters.

```
st_network_cost(net, from = c(p1, p2, p3), to = c(p1, p2, p3), weights = "weight")
#> Units: [m]
#> [,1] [,2] [,3]
#> [1,] 0.000 1614.252 2094.555
#> [2,] 1614.252 0.000 1315.965
#> [3,] 2094.555 1315.965 0.000
```

If we don’t provide any from and to points,
`st_network_cost()`

will by default calculate the cost matrix
for the entire network.

```
# Our network has 701 nodes.
with_graph(net, graph_order())
#> [1] 701
= st_network_cost(net, weights = "weight")
cost_matrix dim(cost_matrix)
#> [1] 701 701
```

In directed networks, `st_network_cost()`

also gives you
the possibility to define if you want to allow travel only over outbound
edges from the *from* points (by setting
`direction = "out"`

, the default), only over inbound edges
(by setting `direction = "in"`

), or both (by setting
`direction = "all"`

, i.e. assuming an undirected
network).

```
%>%
net convert(to_spatial_directed) %>%
st_network_cost(
from = c(p1, p2, p3),
to = c(p1, p2, p3),
direction = "in"
)#> Units: [m]
#> [,1] [,2] [,3]
#> [1,] 0 1899.549 Inf
#> [2,] Inf 0.000 Inf
#> [3,] Inf 1816.688 0
%>%
net convert(to_spatial_directed) %>%
st_network_cost(
from = c(p1, p2, p3),
to = c(p1, p2, p3),
direction = "out"
)#> Units: [m]
#> [,1] [,2] [,3]
#> [1,] 0.000 Inf Inf
#> [2,] 1899.549 0 1816.688
#> [3,] Inf Inf 0.000
%>%
net convert(to_spatial_directed) %>%
st_network_cost(
from = c(p1, p2, p3),
to = c(p1, p2, p3),
direction = "all"
)#> Units: [m]
#> [,1] [,2] [,3]
#> [1,] 0.000 1614.252 2094.555
#> [2,] 1614.252 0.000 1315.965
#> [3,] 2094.555 1315.965 0.000
```

All `...`

arguments are forwarded internally to
`igraph::distances()`

. Among other options, this means that
you can define which algorithm is used for the paths calculation. By
default, `igraph`

will choose the most suitable algorithm
based on characteristics of the request, such as the type of weights
(e.g. only positive or also negative) and the number of given from
locations. For details, see the igraph
documentation.

In this section, we will show a small set of applications of the
routing related functions. It is definitely not meant to be an overview
that covers everything! Also, remember again that
`sfnetworks`

is a general-purpose spatial network analysis
package not optimized for a specific application. However, especially in
combination with other packages it can address a wide variety of
use-cases.

The purpose of closest facility analysis is, given a set of
destination locations (also referred to as the *facilities*) and
origin locations (also referred to as the *sites*), to find the
closest *n* facilities to each site. For example, you might want
to find the nearest transit hub for each address in a city, or the
nearest hospital to high-risk road intersections.

To solve this problem, you can calculate the OD cost matrix with the
sites as *from* points, and the facilities as *to* points.
Then, for each row (i.e. each site) you find the column(s) with the
lowest cost value.

```
# Select a random set of sites and facilities.
# We select random locations within the bounding box of the nodes.
set.seed(128)
= net %>%
hull activate("nodes") %>%
st_geometry() %>%
st_combine() %>%
st_convex_hull()
= st_sample(hull, 50, type = "random")
sites = st_sample(hull, 5, type = "random")
facilities
# Blend the sites and facilities into the network to get better results.
# Also select only the largest connected component.
= net %>%
new_net activate("nodes") %>%
filter(group_components() == 1) %>%
st_network_blend(c(sites, facilities))
#> Warning: st_network_blend assumes attributes are constant over geometries
# Calculate the cost matrix.
= st_network_cost(new_net, from = sites, to = facilities, weights = "weight")
cost_matrix
# Find for each site which facility is closest.
= facilities[apply(cost_matrix, 1, function(x) which(x == min(x))[1])]
closest
# Create a line between each site and its closest facility, for visualization.
= function(sources, targets) {
draw_lines = mapply(
lines function(a, b) st_sfc(st_cast(c(a, b), "LINESTRING"), crs = st_crs(net)),
sources,
targets,SIMPLIFY = FALSE
)do.call("c", lines)
}
= draw_lines(sites, closest)
connections
# Plot the results.
plot(new_net, col = "grey")
plot(connections, col = colors[2], lwd = 2, add = TRUE)
plot(facilities, pch = 8, cex = 2, lwd = 2, col = colors[3], add = TRUE)
plot(sites, pch = 20, cex = 2, col = colors[2], add = TRUE)
```

The traveling salesman problem aims to find the shortest tour that
visits a set of locations exactly once and then returns to the starting
location. In `sfnetworks`

, there are no dedicated functions
to solve this. However, we can bring in other packages here to assist
us. Probably the best known R package for solving traveling salesman
problems is TSP. To
do so, it requires a matrix that specifies the travel cost between each
pair of locations. As shown above, we can use `sfnetworks`

to
calculate such a cost matrix for our network.

Lets first generate a set of random points within the bounding box of the network. These will serve as the locations the traveling salesman has to visit.

```
set.seed(403)
= net %>%
rdm st_bbox() %>%
st_as_sfc() %>%
st_sample(10, type = "random")
```

We can then compute the cost matrix using
`st_network_cost()`

. Internally, it will first snap the
provided points to their nearest node in the network, and then use the
*weight* column to calculate the travel costs between these
nodes. Passing the matrix to `TSP::TSP()`

will make it
suitable for usage inside the `TSP`

package.

```
= activate(net, "nodes")
net = st_network_cost(net, from = rdm, to = rdm, weights = "weight")
cost_matrix
# Use nearest node indices as row and column names.
= st_nearest_feature(rdm, net)
rdm_idxs row.names(cost_matrix) = rdm_idxs
colnames(cost_matrix) = rdm_idxs
round(cost_matrix, 0)
#> Units: [m]
#> 252 545 698 15 224 323 31 510 71 61
#> 252 0 914 1335 1947 1010 1122 776 1052 1365 1204
#> 545 914 0 421 1575 503 358 962 680 451 291
#> 698 1335 421 0 1552 590 241 1383 1031 227 130
#> 15 1947 1575 1552 0 2046 1408 1314 1015 1616 1620
#> 224 1010 503 590 2046 0 767 1155 1151 551 459
#> 323 1122 358 241 1408 767 0 1170 800 304 308
#> 31 776 962 1383 1314 1155 1170 0 796 1413 1252
#> 510 1052 680 1031 1015 1151 800 796 0 1094 970
#> 71 1365 451 227 1616 551 304 1413 1094 0 161
#> 61 1204 291 130 1620 459 308 1252 970 161 0
```

By passing the cost matrix to the solver
`TSP::solve_TSP()`

we obtain an object of class
`TOUR`

. This object contains a named vector specifying the
indices of the provided locations in the optimal order of visit.

```
= solve_TSP(TSP(units::drop_units(cost_matrix)))
tour = as.numeric(names(tour))
tour_idxs
tour_idxs#> [1] 71 61 545 224 252 31 15 510 323 698
# Approximate length of the route.
# In meters, since that was the unit of our cost values.
round(tour_length(tour), 0)
#> [1] 6337
```

Knowing the optimal order to visit all provided locations, we move
back to `sfnetworks`

to match this route to the network. We
do so by computing the shortest paths between each location and its
subsequent one, until we reach the starting point again.

For more details on solving travelling salesman problems in R, see the TSP package documentation.

```
# Define the nodes to calculate the shortest paths from.
# Define the nodes to calculate the shortest paths to.
# All based on the calculated order of visit.
= tour_idxs
from_idxs = c(tour_idxs[2:length(tour_idxs)], tour_idxs[1])
to_idxs
# Calculate the specified paths.
= mapply(st_network_paths,
tsp_paths from = from_idxs,
to = to_idxs,
MoreArgs = list(x = net, weights = "weight")
"node_paths", ] %>%
)[unlist(recursive = FALSE)
# Plot the results.
plot(net, col = "grey")
plot(rdm, pch = 20, col = colors[2], add = TRUE)
walk(tsp_paths, plot_path) # Reuse the plot_path function defined earlier.
plot(
st_as_sf(slice(net, rdm_idxs)),
pch = 20, col = colors[3], add = TRUE
)plot(
st_as_sf(slice(net, tour_idxs[1])),
pch = 8, cex = 2, lwd = 2, col = colors[3], add = TRUE
)text(
st_coordinates(st_as_sf(slice(net, tour_idxs[1]))) - c(200, 90),
labels = "start/end\npoint"
)
```

With respect to a given point \(p\) and a given travel time \(t\), an isochrone is the line for which it holds that the travel time from any point on the line to or from \(p\) is equal to \(t\). When using distances instead of time, it is called an isodistance.

In `sfnetworks`

there are no dedicated, optimized
functions for calculating isochrones or isodistances. However, we can
roughly approximate them by using a combination of sf and tidygraph
functions. Lets first calculate imaginary travel times for each edge,
using randomly generated average walking speeds for each type of
edge.

```
# How many edge types are there?
= net %>%
types activate("edges") %>%
pull(type) %>%
unique()
types#> [1] residential secondary path footway track
#> [6] unclassified pedestrian service cycleway
#> 9 Levels: cycleway footway path pedestrian residential secondary ... unclassified
# Randomly define a walking speed in m/s for each type.
# With values between 3 and 7 km/hr.
set.seed(1)
= runif(length(types), 3 * 1000 / 60 / 60, 7 * 1000 / 60 / 60)
speeds
# Assign a speed to each edge based on its type.
# Calculate travel time for each edge based on that.
= net %>%
net activate("edges") %>%
group_by(type) %>%
mutate(speed = units::set_units(speeds[cur_group_id()], "m/s")) %>%
mutate(time = weight / speed) %>%
ungroup()
net
```

```
#> # A sfnetwork with 701 nodes and 851 edges
#> #
#> # CRS: EPSG:3035
#> #
#> # An undirected multigraph with 14 components with spatially explicit edges
#> #
#> # A tibble: 851 × 8
#> from to name type geometry weight speed time
#> <int> <int> <chr> <fct> <LINESTRING [m]> [m] [m/s] [s]
#> 1 1 2 Havixbecker St… resi… (4151491 3207923, 415147… 28.9 1.06 27.3
#> 2 3 4 Pienersallee seco… (4151398 3207777, 415139… 108. 1.83 58.8
#> 3 5 6 Schulte-Bernd-… resi… (4151408 3207539, 415141… 54.4 1.06 51.4
#> 4 7 8 NA path (4151885 3206698, 415186… 155. 1.47 106.
#> 5 9 10 Welsingheide resi… (4151732 3207017, 415172… 209. 1.06 197.
#> 6 11 12 NA foot… (4152152 3206984, 415214… 63.0 1.25 50.6
#> # … with 845 more rows
#> #
#> # A tibble: 701 × 1
#> geometry
#> <POINT [m]>
#> 1 (4151491 3207923)
#> 2 (4151474 3207946)
#> 3 (4151398 3207777)
#> # … with 698 more rows
```

Now, we can calculate the total travel time for each shortest path
between the (nearest node of the) origin point and all other nodes in
the network, using the node measure function
`tidygraph::node_distance_from()`

with the values in the
*time* column as weights. Then, we filter the nodes reachable
within a given travel time from the origin. By drawing a convex hull
around these selected nodes we roughly approximate the isochrone. If we
wanted isochrones for travel times *towards* the central point,
we could have used the node measure function
`tidygraph::node_distance_to()`

instead.

```
= activate(net, "nodes")
net
= net %>%
p st_geometry() %>%
st_combine() %>%
st_centroid()
= net %>%
iso filter(node_distance_from(st_nearest_feature(p, net), weights = time) <= 600)
= iso %>%
iso_poly st_geometry() %>%
st_combine() %>%
st_convex_hull()
plot(net, col = "grey")
plot(iso_poly, col = NA, border = "black", lwd = 3, add = TRUE)
plot(iso, col = colors[2], add = TRUE)
plot(p, col = colors[1], pch = 8, cex = 2, lwd = 2, add = TRUE)
```

The workflow presented above is generalized in a spatial morpher
function `to_spatial_neighborhood()`

, which can be used
inside the `tidygraph::convert()`

verb to filter only those
nodes that can be reached within a given travel cost from the given
origin node.

```
# Define the threshold values (in seconds).
# Define also the colors to plot the neighborhoods in.
= rev(seq(60, 600, 60))
thresholds = sf.colors(n = 10)
palette
# Plot the results.
plot(net, col = "grey")
for (i in c(1:10)) {
= convert(net, to_spatial_neighborhood, p, thresholds[i], weights = "time")
nbh plot(nbh, col = palette[i], add = TRUE)
}
plot(p, pch = 8, cex = 2, lwd = 2, add = TRUE)
```

In many cases the shortest path based geographical distances or
travel time is not necessarily the optimal path. The most appropriate
route may depend on many factors, for example staying away from large
and potentially unpleasant highways for motor traffic. All networks have
different characteristics. In OpenStreetMap networks the ‘highway’ type
is often a good (albeit crude) approximation of the network. The
`roxel`

demo dataset is derived from OpenStreetMap and
represents a largely residential network:

```
table(roxel$type)
#>
#> cycleway footway path pedestrian residential secondary
#> 42 67 95 1 394 62
#> service track unclassified
#> 160 5 25
```

Building on the shortest paths calculated in a previous section we can try an alternative routing profile. Let’s take a look at these paths to see what type of ways they travel on:

```
= net %>%
paths_sf activate("edges") %>%
slice(unlist(paths$edge_paths)) %>%
st_as_sf()
table(paths_sf$type)
#>
#> cycleway footway path pedestrian residential secondary
#> 2 0 6 0 38 1
#> service track unclassified
#> 2 0 6
plot(paths_sf["type"], lwd = 4, key.pos = 4, key.width = lcm(4))
```

As with the overall network, the paths we calculated are dominated by residential streets. For the purposes of illustration, lets imagine we’re routing for a vehicle that we want to keep away from residential roads, and which has a much lower cost per unit distance on secondary roads:

```
= c(
weighting_profile cycleway = Inf,
footway = Inf,
path = Inf,
pedestrian = Inf,
residential = 3,
secondary = 1,
service = 1,
track = 10,
unclassified = 1
)
= net %>%
weighted_net activate("edges") %>%
mutate(multiplier = weighting_profile[type]) %>%
mutate(weight = edge_length() * multiplier)
```

We can now recalculate the routes. The result show routes that avoid residential networks.

```
= st_network_paths(weighted_net, from = 495, to = c(458, 121), weights = "weight")
weighted_paths
= weighted_net %>%
weighted_paths_sf activate("edges") %>%
slice(unlist(weighted_paths$edge_paths)) %>%
st_as_sf()
table(weighted_paths_sf$type)
#>
#> cycleway footway path pedestrian residential secondary
#> 0 0 0 0 9 43
#> service track unclassified
#> 3 0 0
plot(st_as_sf(net, "edges")["type"], lwd = 4,
key.pos = NULL, reset = FALSE, main = "Distance weights")
plot(st_geometry(paths_sf), add = TRUE)
plot(st_as_sf(net, "edges")["type"], lwd = 4,
key.pos = NULL, reset = FALSE, main = "Custom weights")
plot(st_geometry(weighted_paths_sf), add = TRUE)
```

Note that developing more sophisticated routing profiles is beyond
the scope of this package. If you need complex mode-specific routing
profiles, we recommend looking at routing profiles associated with open
source routing engines, such as bike.lua
in the OSRM project. Another direction of travel could be to extend on
the approach illustrated here, but this work could be well-suited to a
separate package that builds on `sfnetworks`

(remembering
that sophisticated routing profiles account for nodes and edges). If
you’d like to work on such a project to improve mode-specific routing in
R by building on this package, please let us know in the discussion
room!